Voice Memo: This command instructs the system
to display the Voice Memo screen. Once the
screen is displayed, you can use other Voice
Memo commands. See “Voice Memo Commands”
later in this section for more information.
Address Book: This command instructs the
system to display the Address Book screen. Once
the screen is displayed, you must operate the
system manually. See Main Menu on page 9.
Mute, Unmute: The Mute command instructs the
system to turn off all sound. The Unmute command
will return the sound to its previous level.
DSP Off: This command instructs the system to
turn off DSP for the current audio source.
DSP Talk: This command instructs the system to
change the DSP to Talk for the current audio
source.
DSP Driver Seat: This command instructs the
system to change the DSP to Driver Seat for the
current audio source.
DSP Rear Seat: This command instructs the
system to change the DSP to Rear Seat for the
current audio source.
DSP Spacious: This command instructs the
system to change the DSP to Spacious for the
current audio source.
Set Day: This command instructs the system to
change the screen appearance to Day mode.
Set Night: This command instructs the system to
change the screen appearance to Night mode.
Set Day/Night Auto: This command instructs the
system to change the screen appearance to
Auto mode.
Set Units English: This command instructs the
system to set measurement units to feet/miles.
Set Units Metric: This command instructs
the system to set measurement units to
meters/kilometers.
Set Units Imperial: This command instructs the
system to set measurement units to yards/miles.
Load Disc: This command instructs the system
that you will be loading a CD into the CD changer.
Load All: This command instructs the system that
you will be loading six CDs into the CD changer.
Eject Disc: This command instructs the system to
eject the currently active CD from the CD changer.
96
To Next Page
Loading...
