Exit Lighting
This feature allows you to select the amount of time you
want the exterior lamps to remain on when it is dark
enough outside. This happens after the key is turned
from ON/RUN to LOCK/OFF.
Press the customization button until Exit Lighting appears
on the DIC display. Press the set/reset button once to
access the settings for this feature. Then press the menu
up/down button to scroll through the following settings:
Off: The exterior lamps will not turn on.
30 Seconds (default): The exterior lamps will
stay on for 30 seconds.
1 Minute: The exterior lamps will stay on for
one minute.
2 Minutes: The exterior lamps will stay on for
two minutes.
No Change: No change will be made to this feature.
The current setting will remain.
To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.
Approach Lighting
This feature allows you to select whether or not to have
the exterior lights turn on briefly during low light
periods after unlocking the vehicle using the Remote
Keyless Entry (RKE) or keyless access transmitter.
Press the customization button until Approach Lighting
appears on the DIC display. Press the set/reset button
once to access the settings for this feature. Then press
the menu up/down button to scroll through the following
settings:
Off: The exterior lights will not turn on when you unlock
the vehicle with the transmitter.
On (default): If it is dark enough outside, the exterior
lights will turn on briefly when you unlock the vehicle
with the transmitter.
The lights will remain on for 20 seconds or until the lock
button on the transmitter is pressed, or the vehicle is
no longer off. See Remote Keyless Entry (RKE) System
Operation on page 2-7 and Keyless Access System
Operation on page 2-10 for more information.
No Change: No change will be made to this feature.
The current setting will remain.
To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.
3-74
To Next Page
Loading...
