Cadillac CTS 2008 - Radio Reception

g (Mute/Speech Recognition): Press and release
this button to silence the vehicle speakers only.
The audio of the wireless and wired headphones,
if the vehicle has these features, does not mute. Press
and release this button again, to turn the sound on.
• For vehicles with a navigation system, press
and hold
g for two seconds to initiate speech
recognition. See “Speech Recognition” in the
Navigation System manual for more information.
• For vehicles without a navigation system, press and
hold
g for two seconds to interact with OnStar
®
or
Bluetooth (if equipped). See the OnStar
®
System
on page 2-55,orBluetooth
®
on page 3-111 for more
information about these features.
• For vehicles with a navigation system and OnStar,
press and hold
g for two seconds then say
“OnStar” to interact with the OnStar system.
See the OnStar
®
System on page 2-55 for more
information.
• For vehicles with a navigation system, Onstar, and
Bluetooth, press and hold
g for two seconds
and say “hands free” to interact with OnStar or
Bluetooth. See the OnStar
®
System on page 2-55,
or Bluetooth
®
on page 3-111 for more information
about these features.
Radio Reception
Frequency interference and static can occur during
normal radio reception if items such as cell phone
chargers, vehicle convenience accessories, and external
electronic devices are plugged into the accessory
power outlet. If there is interference or static, unplug the
item from the accessory power outlet.
AM
The range for most AM stations is greater than for FM,
especially at night. The longer range can cause
station frequencies to interfere with each other.
For better radio reception, most AM radio stations
boost the power levels during the day, and then reduce
these levels during the night. Static can also occur
when things like storms and power lines interfere with
radio reception. When this happens, try reducing
the treble on your radio.
FM Stereo
FM stereo gives the best sound, but FM signals reach
only about 10 to 40 miles (16 to 65 km). Tall buildings or
hills can interfere with FM signals, causing the sound
to fade in and out.
3-125