Cadillac SRX Owner Manual (Include Mex) - 2012
Infotainment System 7-55
Switching Between Calls
(Call Waiting Calls Only)
To swit c h betw e e n cal l s:
1. Turn or press the
MENU/SELECT knob.
2. Select Switch Call from
the menu.
Conference Calling
Conference calling and three�way
calling must be supported on the
Bluetooth phone and enabled by
the wireless service carrier to work.
To star t a co n f erenc e while in a
current call:
1. Turn or press the
MENU/SELECT knob.
2. Select Enter Number.
3. Enter the character sequence
then select Call. See “Entering
aCharacterSequence” in
Operation on page 7�7 for
more information.
4. After the call has been
placed, turn or press the
MENU/SELECT knob and
choose Merge Calls.
5. To add more callers to the
conference call, repeat Steps 1
through 4. The number of callers
that can be added is limited by
your wireless service carrier.
Ending a Call
Turn or press the MENU/SELECT
knob and select Hang Up.
Muting a Call
To Mute a Call
Turn or press the MENU/SELECT
knob and select Mute Call.
To Cancel Mute
Turn or press the MENU/SELECT
knob and select Mute Call.
Dual Tone Multi-Frequency
(DTMF) Tones
The in�vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu�driven
phone system.
1. Turn or press the MENU/
SELECT knob and select
Enter Number.
2. Enter the character sequence.
See “Entering a Character
Sequence” in Operation on
page 7�7 for more information.
Bluetooth (Voice
Recognition)
Using Voice Recognition
To use voice re c ognit i o n, pr e ss
the
b / g button located on the
steering wheel. Use the commands
below for the various voice features.
For additional information, say
"Help" while you are in a voice
recognition menu.
To Next Page
Loading...
