Cadillac XT5 2018 - Power Liftgate; Cargo Management System

18
OPEN/CLOSE THE POWER LIFTGATE
Press the Power Ligate
buon on the Remote Keyless
Entry (RKE) transmier twice.
Press the Power Ligate knob
on the driver’s door.
Press the touchpad (A) under
theligate handle to open
theligate.
Press the buon (B) next to
the pull handle to close the
ligate.
PROGRAMMING THE LIFTGATE HEIGHT
1. Turn the Power Ligate knob to
the3/4 mode position.
2. Open the ligate.
3. Adjust the ligate manually to the
desired height.
4. To save the seing, press and hold
the buon next to the pull handle
(B) for 3 seconds. e turn signals
ash and a beep sounds when the
seing is saved.
HANDS-FREE OPERATION
To open or close the ligate hands-free, kick your foot straight
in and out under the le corner of the rear bumper. Do not
swing your foot side-to-side.
e RKE transmier must be within 3 feet of the ligate.
See Keys, Doors and Windows in your Owner's Manual.
e cargo management system features a rail system and cargo
fence that divides the cargo area for smaller items.
ADJUST THE FENCE POSITION
1. Turn each knob on the fence posts to align the

Unlock
symbol with the buon arrow.
2. Slide the fence to
the desired posi-
tion along each
rail until it clicks
intoplace.
3. Turn each knob
to the Lock
position.
REMOVE THE
FENCE
1. Turn each knob on the fence
posts to align the

Unlock
symbol with the buon arrow.
2. Press the buons on the rail
sliders and pull up the fence
posts to remove the fence. Store
the fence under the cargo oor
at the front of the compartment.
Secure it with the straps.
3. Move the rail sliders to an open slot on the rail to remove the
sliders. Store the sliders under the cargooor.
See Storage in your Owner's Manual.
POWER LIFTGATE
CARGO MANAGEMENT SYSTEM♦
A
B