5
ELECTRONIC PRECISION SHIFT
e automatic transmission shi paern is displayed on top of
the shi lever. e selected gear position illuminates in red on the
shi lever. e shi lever always starts in the center position, repre-
sented by a dot on the shi paern. Aer shiing, it returns to the
center position.
Park – Press the buon on top of the lever to shi into Park.
Reverse – Press the buon on the side of the lever and move the
lever forward and then le to shi into Reverse.
Neutral – Move the lever forward to shi into Neutral.
Drive – Move the lever rearward to shi into Drive.
Note: The transmission will not stay in Neutral for an extended period.
It will automatically shift into Park. See Automated Car Wash Mode.
Tap Shi Mode – With the transmission in Drive, pull back on the
lever to activate Manual Mode. Press the le steering wheel paddle
to downshi and the right paddle to upshi. Pull back on the lever
again to return to Drive.
See Driving and Operating in your Owner's Manual.
DRIVER MODE CONTROL
♦
Driver Mode Control automatically adjusts the steering, suspension,
and powertrain tuning in real time.
Press the MODE buon
on the center console to
select the Tour, Sport,
Snow/Ice (front-wheel
drive models only), or
AWD (all-wheel drive)
mode.
e AWD indicator below the
Mode buon will illuminate
when the Sport or AWD
mode is selected.
See Driving and Operating in your Owner's Manual.
AUTOMATED CAR WASH MODE
To place the transmission in Neutral with the engine running for an
extended period of time:
1. While pressing the brake pedal, open the driver's door and
then shi to N (Neutral). If the door is opened aer shiing to
Neutral, the transmission may shi to Park.
2. e indicator should show N. If it does not, select Neutral again.
3. Upon returning to the vehicle, shi into Park.
See Driving and Operating in your Owner's Manual.
♦ Optional equipment