Need help?Do you have a question about the Caen DT5725 and is the answer not in the manual?
General| Model | DT5725 |
|---|---|
| Channels | 4 |
| Sampling Rate | 250 MS/s |
| Input Impedance | 50 Ω |
| Bandwidth | 125 MHz |
| Operating Temperature | 0°C to +50°C |
| Trigger Modes | Software, External |
| On board memory | 512 MB |
| Interface | USB 2.0 |
| Type | Digitizer |
| Measurement Range | ±1 V |
| Resolution | 14-bit |
Explains the analog input characteristics, gain, and DC offset settings.
Describes the self-calibration procedure for the analog-to-digital converters.
Explains how triggers are processed and events are formed.
Details the format of the acquired data events, including header and data.
Overview of how triggers are handled across channels.
Information on USB and Optical Link drivers for system communication.
Details CAENVMELib, CAENComm, and CAENDigitizer libraries.
Utility for firmware and PLL upgrades.
Information on upgrading the default digitizer firmware.
Details on upgrading DPP-PSD and DPP-PHA firmware.
To Next Page
