Need help?Do you have a question about the Caen DT5730 and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| ADC Resolution | 14-bit |
| Sampling Rate | 500 MS/s |
| Input Impedance | 50 Ω |
| Bandwidth | 250 MHz |
| Interface | USB 2.0 |
| Trigger Modes | External |
| Operating Temperature | 0 to +50 °C |
| Storage Temperature | -20 to +70 °C |
| Power Supply | 12 V DC |
Configuration and characteristics of the analog input channels.
Management of clock signals and PLL for sampling and synchronization.
Different acquisition modes and the process for calibrating ADC channels.
Methods for starting and stopping data acquisition sessions.
How triggers initiate data capture, including pre/post-trigger samples.
How acquired events are stored in memory and how to define custom event sizes.
Format and components of the acquired data event, including headers and data.
Methods for synchronizing multiple digitizer boards for coherent acquisition.
General principles of trigger management and specific trigger sources.
How channels generate their own trigger signals based on input levels.
Configuration for coincidence detection among multiple trigger sources.
To Next Page
