Caen DT5730 - Power Requirements

CAEN
Electronic Instrumentation
UM3148 – DT5730/DT5725 User Manual rev. 2
11
5 Power Requirements
Both DT5725 and DT5730 modules are powered by the external AC/DC stabilized power supply provided with the
digitizer and included in the delivered kit.
The DT5730 typical power consumption is 2.8 A (@ +12 V).

Note.: Using a different power supply source, like battery or linear type, it is recommended the source to provide +12
V and, at least, 3.5 A in case of DT5730; the power jack is a 2.1 mm type, a suitable cable is the RS 656-3816 type (or
similar)
Fig. 5.1: AC/DC power supply provided with the module