Cafe C7CGAAS4TW3 - Before First Use; Adding Beans to the Bean Hopper; Filling the Water Reservoir

10
Before First Use
Adding Beans to the Bean Hopper
1
Remove the bean hopper lid by lifting it using the tab on the front. There is a
vacuum seal, so it may take some force to remove it the first time.
2
Pour your desired beans into the bean hopper. Spread beans out so they evenly
cover the bottom surface.
3
When beans have been added, replace the lid on the bean hopper and press
down firmly to secure it.
4
Turn the grinder knob to your desired grind size.
It is recommend to use a grind
3 size for the best extraction.
Filling the Water Reservoir
1
Remove the water reservoir from the
coffee maker by gently lifting it out
of the water reservoir base.
2
Remove the lid by using your fingers
or thumb to press up until the lid
releases from the water reservoir
body.
3
Fill the water reservoir with cool or
room temperature water to your
desired volume.
4
Replace the lid on the water
reservoir and press down until it is
secure.
5
Place the water reservoir back into
the base.
Bean Hopper
Grinder Knob
Bean Hopper
Lid
Lift and remove
the reservoir lid by
using your fingers
or thumb to press
up on the circular
tab.
To refill, simply lift
the reservoir body
our of the base, fill
with cool or room
temperature water,
and replace on the
base after filling.
Water reservoir
main body.
Water reservoir
base.
Pour your desired
coee beans into the
bean hopper.
10 cups
8 cups
6 cups
4 cups
2 cups
75 ozMax