To Next PageTo Next Page
Need help?Do you have a question about the Cal Spas Escape Series and is the answer not in the manual?
Details risks of severe injury or drowning and electric shock from installation and use.
Covers risks of hyperthermia, injury reduction, and health precautions for spa users.
Tasks and considerations before spa delivery, including permits and site preparation.
Factors for choosing an optimal spa location, considering usage, environment, and privacy.
Ensuring a solid and level foundation to support the spa's weight and prevent damage.
Requirements and procedures for safe 240V spa electrical wiring.
Provides diagrams for GFCI wiring based on control system type.
Procedure for testing the GFCI breaker before first use and periodically.
Checking plumbing connections, unions, and drain valves before filling.
Steps for removing, preparing, and installing the filter cartridge.
Instructions on how to fill the spa with water to the correct level.
Activating the spa's electrical supply via the GFCI breaker.
Procedure for initializing the pump and entering Priming Mode.
Re-installing the filter and performing initial water chemistry adjustments.
Allowing the spa to heat up to the set temperature after priming.
Understanding the automatic priming sequence and its duration.
Step-by-step guide for manually removing trapped air from the pump.
Detailed explanation of icons and indicators displayed on the spa's main screen.
Controls for operating spa features like jets and lights.
How to navigate menus and select items using control panel buttons.
Navigating through menus using arrows and selection boxes.
Operating on/off switches and managing settings changes.
Steps to access and navigate through main and settings menus.
Using press-and-hold for lists and viewing message screens.
Procedure for setting the spa's current time.
Using information icon and message screen for alerts and settings.
Procedure for adjusting the spa's set temperature.
How to check current water temp and understand heater status indicators.
Selecting between Ready and Rest heat modes.
Understanding the Ready-In-Rest mode feature.
Identifying the current heat mode via icons on the main screen.
Selecting between High and Low temperature ranges for the spa.
Identifying the current temperature range via icons on the main screen.
Preventing controller use while allowing automatic functions.
Restricting access to set temperature and programmed settings.
Understanding how to lock both panel and settings simultaneously.
Procedure for inverting and restoring the display orientation.
Scheduling filtration cycles for optimal water clarity.
Ensuring efficient operation of the electric heater and spa usage.
How to adjust water flow through jets for personalized hydrotherapy.
Operating the spa's LED lighting through different modes.
Directing water flow between different jet sections.
Adding air to jet streams for enhanced massage experience.
Using optional waterfall features for ambiance and relaxation.
Basic pump control and activating various pulse modes.
Cycling through pulse modes and using the demo mode.
Understanding automatic shut-off and pump overheating protection.
System purge function and ATS sensor monitoring.
Four essential factors for maintaining excellent spa water quality.
Maintaining proper levels of alkalinity, hardness, and pH.
Using sanitizers like chlorine or bromine to kill bacteria.
Importance of regular filter cleaning for water clarity and system efficiency.
Establishing a routine for consistent spa water maintenance.
Methods and ideal ranges for testing total alkalinity, calcium hardness, and pH.
Correcting low or high total alkalinity levels for pH stability.
Adjusting calcium hardness to prevent corrosion and staining.
Adjusting pH to prevent corrosion, scaling, and staining.
Choosing between chlorine and bromine as spa sanitizers.
Procedure for shocking the spa water to remove contaminants.
Understanding how bather load affects chemical needs and filtration time.
Detailed steps for cleaning and maintaining the spa filter.
How the ozonator works and its role in water purification.
A schedule of routine maintenance tasks for the spa.
Identifying and solving common issues causing cloudy water.
Solutions for issues like scum, algae, irritation, stains, and scale.
Instructions for removing and re-attaching spa pillows.
Procedure for safely removing and replacing spa jets.
Steps for installing the spa cover and its locking mechanism.
Final steps for fastening and locking the spa cover.
Identifying the spa's drain valve.
Accessing the drain valve by removing its cap.
Attaching a garden hose to the drain valve for water removal.
The process of draining the spa water through the connected hose.
Procedure for winterizing the spa to prevent freeze damage.
Instructions for cleaning and replacing spa filters.
Steps to take when leaving the spa unattended for short periods.
Using appropriate cleaners for spa covers and pillows.
Cleaning the spa shell with recommended cleaners.
Pairing a Bluetooth device with the spa's sound system.
Introduction to the Cal Connect smart control system for spa monitoring.
Details on the home and spa modules needed for Cal Connect setup.
Instructions for downloading the mobile app from app stores.
Enabling Bluetooth, resetting GFCI, and starting app setup.
The app scanning for the spa's Wi-Fi module and detecting its serial number.
Proceeding with account creation using the CMS code.
Part numbers and descriptions for spa pillows.
Part numbers and descriptions for spa LED lighting components.
Part numbers and specifications for spa filter cartridges.
Part numbers and descriptions for optional waterfall features.
Part numbers for teleweir skimmer components.
Part numbers for air control assemblies.
Part numbers for suction fittings and associated parts.
Part numbers for various cluster jet types.
Part numbers for poly jet types.
Part numbers for mini jet types.
Part numbers for power jet types.
Part numbers for whirlpool jet types.
Part numbers for spa cover lock mechanisms and keys.
Information on ordering replacement spa cabinet panels.
Details on available spa cover types and sizes.
Solutions for issues like pump not priming or breaker tripping.
Resolving problems with system startup, breaker tripping, and control panel response.
Addressing issues where the spa water does not get hot.
Addressing spa overheating and related message codes.
Solutions for low water pressure or no water stream from jets.
Resolving issues with pump operation, noise, and constant running.
Addressing pump shutdown during operation, burning smells, and non-running pumps.
Understanding and managing thermal creep phenomenon in well-insulated spas.
Details on warranty periods for shell, equipment, plumbing, and cabinet.
Coverage for fuses, headrests, jets, lighting, and other parts.
Importance of using genuine parts and voiding warranty with aftermarket parts.
Procedure for obtaining warranty service and handling claims.
Conditions that void the warranty and limitations on coverage.
Process for prorated replacement of non-repairable spa units.
Manufacturer's disclaimers and consumer's legal rights.
General