How to fix cloudy water in my Cal Spas F-1325 Hot Tub?
Cloudy water in your Cal Spas Hot Tub can be due to a few reasons. It could be caused by a dirty filter, so cleaning the filter is recommended. You might also need to shock the spa with sanitizer, add sanitizer, adjust the pH and/or alkalinity to the recommended range, run the jet pump while cleaning the filter, or, as a last resort, drain and refill the spa.
What to do if my Cal Spas Hot Tub has a water odor?
If your Cal Spas Hot Tub has a water odor, it could be due to excessive organics in the water or improper sanitation. To resolve this, shock the spa with sanitizer or add sanitizer. If the pH is low, adjust it to the recommended range.
How to get rid of algae growth in my Cal Spas Hot Tub?
Algae growth in your Cal Spas Hot Tub is often due to high pH or low sanitizer levels. If the problem is visible or persistent, shock the spa with sanitizer. If necessary, drain, clean, and refill the spa.
How to remove stains from my Cal Spas Hot Tub?
Stains in your Cal Spas Hot Tub can be caused by total alkalinity and/or pH being too low, or high iron or copper in the source water. Adjust the total alkalinity and/or pH. You can also use a stain and scale inhibitor.
How to clean organic buildup/scum ring around my Cal Spas F-1325 Hot Tub?
Organic buildup or a scum ring around your Cal Spas Hot Tub is caused by a buildup of oils and dirt. Wipe off the scum with a clean rag. If the buildup is severe, drain the spa, use a spa surface and tile cleaner to remove the scum, and then refill the spa.
Why does my Cal Spas F-1325 Hot Tub have eye irritation?
Eye irritation in your Cal Spas Hot Tub can occur if the pH or sanitizer level is too low. Adjust the pH to the correct level. You may also need to shock the spa with sanitizer and maintain the proper sanitizer level.
What causes skin irritation/rash in my Cal Spas F-1325 and how to solve it?
Skin irritation or rash in your Cal Spas Hot Tub can be caused by unsanitary water or a free chlorine level above 5ppm. Shock the spa with sanitizer and maintain the sanitizer level. Also, allow the free chlorine level to drop below 5 ppm before using the spa.
How to eliminate musty odor from my Cal Spas F-1325?
A musty odor in your Cal Spas Hot Tub is typically caused by bacteria or algae growth. To fix this, shock the spa with sanitizer.
What causes scale buildup in my Cal Spas F-1325 and how to remove it?
Scale buildup in your Cal Spas Hot Tub is often due to high calcium content in the water, or total alkalinity and pH being too high. To address this, adjust total alkalinity and pH. If scale removal is required, drain the spa, scrub off the scale, refill the spa, and balance the water.
Warnings about drowning, suction fittings, and electrical shock hazards.
Risks of hyperthermia, high temperatures, and general injury prevention.
Checklist for delivery, location selection, and spa placement considerations.
Tips for keeping the spa area clean and ensuring service access.
Guidance on proper spa foundation support and installation requirements.
Details on GFCI breakers, wiring gauge, and installation specifications.
Steps for inspecting equipment, filling the spa, and checking water level.
Instructions for preparing and installing the filter cartridge.
Adjusting water chemistry and initiating the spa heating process.
Manual steps to remove trapped air from the spa pump.
Steps to change the language displayed on the spa control panel.
Explains the meaning of various icons on the spa control panel.
Guidance on interacting with the spa control panel menus.
How to access and manage system messages on the control panel.
How to set temperature and access equipment controls via the panel.
Methods for incrementing or decrementing values on the control panel.
Procedures for exiting screens and navigating between them.
How to select and change the spa's heat mode.
Configuration for managing two distinct temperature ranges.
Detailed explanation of spa heat modes and circulation.
How filtration, ozone, freeze protection, and clean-up cycles work.
Configuring the primary filtration cycle times.
Setting up optional second filter cycle and spa lighting timers.
Procedures for restricting access to control panel functions.
How to use Hold Mode for maintenance and service tasks.
Configuring the panel's sleep timer and understanding demo mode.
Accessing fault logs, changing units, and managing reminders.
Setting the duration for the spa's clean-up cycle.
How to change the language displayed on the control panel.
Troubleshooting messages related to heater faults and water flow.
Messages indicating sensor failures or synchronization issues.
Messages related to system errors or communication failures.
Messages related to program memory, clock failure, or GFCI test issues.
Warnings for pumps stuck on or overheating, requiring immediate action.
Icons indicating temperature range, heat mode, filter cycles, and panel lock status.
Icons for WiFi connectivity, water temperature, and other status indicators.
Description of buttons for controlling spa devices and navigating menus.
How the selection box is used for menu interaction.
Guidance on using navigation arrows and menus on the control panel.
How to manage settings using save, cancel, and toggle switches.
Steps for navigating the main and settings menus.
Using press-and-hold and viewing message screens.
Step-by-step guide to setting the spa's time-of-day.
How to view current and set temperatures on the control panel.
Understanding heater status icons and temperature display indicators.
Explanation of Ready, Rest, and Ready-in-Rest modes.
How to select and adjust temperature ranges for the spa.
Step-by-step instructions for locking the spa panel.
How to invert the spa control panel display.
Configuring the start and end times for spa filtration cycles.
Detailed explanation of all icons on the main spa screen.
Instructions for locking the spa control panel to prevent unauthorized use.
Procedures for unlocking the spa control panel.
How to lock and unlock the spa's settings menu.
Different modes of operation for the circulation pump.
How filtration, ozone, and freeze protection systems work.
Configuration and use of the optional clean-up cycle feature.
Accessing system model, software, and configuration details.
Reviewing fault logs and using diagnostic features for troubleshooting.
Explanation of Ready, Rest, and Ready-in-Rest modes.
Information on the M8 feature for optimizing pump usage.
Accessing and configuring heat, filter, and time settings.
Managing reminders, locks, light cycles, and hold mode.
How to access the diagnostics screen for technical information.
Explanations for common spa alerts like freezing or overheating.
Troubleshooting messages specific to the spa's heater system.
Messages indicating sensor failures or synchronization issues.
Alerts related to system errors, memory, or maintenance reminders.
Reminders for filter cleaning, GFCI testing, and service check-ups.
Reminders for changing water, cleaning cover, and treating wood.
Notes on communications errors, software updates, and message interpretation.
Advice for efficient spa operation and energy saving.
Operation and features of spa jets and LED lighting systems.
How to adjust water flow and air injection for jets and waterfalls.
Fundamental principles for maintaining clear and healthy spa water.
Importance of chemical balance and sanitizers for water quality.
Role of filtration and consistent maintenance in water clarity.
Procedures for testing and adjusting total alkalinity and pH levels.
How to balance calcium hardness and maintain ideal water parameters.
Guidelines for using chlorine or bromine as spa sanitizers.
Procedure for shocking spa water to remove contaminants.
How bather load affects spa water chemistry and filtration needs.
Proper filter cleaning and ozone generator operation.
Information on factory filtration and a routine maintenance schedule.
Identifying and solving common water clarity issues like cloudiness or odor.
How to remove and reinstall spa pillows for cleaning.
Instructions for removing and replacing spa jets.
Step-by-step guide for cleaning hydrostreamer jets.
Positioning the spa cover and installing tie-down hardware and locks.
Finding the spa's built-in drain mechanism and removing the cap.
Steps to connect a hose and drain the spa water.
Procedures for winterizing the spa to prevent freeze damage.
Guidelines for leaving the spa unattended for short periods.
Procedures for cleaning the spa's exterior components.
Instructions for pairing and using the Bluetooth sound system.
Using air injection and swim tether for resistance training.
Information and precautions for using exercise equipment.
Catalog of various jet inserts and their part numbers.
Replacement pillows and waterfall assembly part numbers.
Replacement pillows and related accessories.
Catalog of different spa drain types.
Catalog of suction fittings and their part numbers.
Catalog of air control assemblies and diverter valve sub-assemblies.
Information on ordering cabinet panels and available spa cover types.
Solutions for startup problems, power interruptions, and system faults.
Troubleshooting control panel response, spa operation, and heating problems.
Troubleshooting spa overheating and low water pressure issues.
Diagnosing jet surge, constant pump run, and noisy pump problems.
Troubleshooting pump shutdowns, smells, and managing thermal creep.
Warranty terms for spa shell, equipment, plumbing, and cabinet materials.
Details on warranties for other components and service procedures.
Conditions that void the warranty and excluded issues.
Details on prorated replacements and consumer legal rights.
Contact information for customer service and technical assistance.
Website addresses for product information and spare parts purchase.
To Next Page
General
