Need help?Do you have a question about the Cal Spas ESCAPE and is the answer not in the manual?
Instructions on finding and recording the spa's serial number for registration and warranty activation.
Supervision of children and securing the spa cover when not in use to prevent drowning risks.
Ensuring suction fittings are compatible and not broken or missing to prevent severe injury.
Guidelines for safe electrical installation and avoiding shock hazards, including grounding and distance.
Warnings about water temperature limits and potential health risks associated with overheating.
Precautions regarding prolonged exposure, pregnancy, alcohol, and drugs during spa use.
Details on hyperthermia symptoms and warnings about alcohol, drugs, and pregnancy.
Information on GFCI testing, appliance placement near the spa, and general electrical safety.
Warnings related to infectious diseases, entering/exiting, exercise, and prolonged immersion.
Essential steps to take before spa delivery, including permits and foundation preparation.
Factors to consider for optimal spa placement, including safety, view, privacy, and service access.
Recommendations for a solid, level foundation capable of supporting the spa's weight.
Detailed instructions for safe and compliant 240V electrical wiring, including GFCI requirements.
Visual guide for GFCI wiring connections for US and Canadian spa installations.
Procedure for testing the GFCI breaker before use and periodically to ensure safety.
Wiring diagram for GFCI connections specific to European installations.
Steps for filling the spa, powering up, priming the pump, and initial setup.
Steps for removing, preparing, and installing the spa filter cartridge.
Turning on power, priming the pump, installing the filter, and adjusting water chemistry.
Allowing the spa to heat and completing initial setup procedures.
Troubleshooting and manual methods for priming the spa pump if it fails to start.
Overview of the spa's touchscreen control panel, navigation, and language settings.
Understanding icons, navigation, and message indicators on the spa control screen.
How to set temperature, access spa equipment controls, and increment/decrement values.
Methods for exiting screens, navigating pages, and scrolling through lists on the control panel.
Configuring heat modes (Ready vs. Rest) and understanding dual temperature ranges.
Explanation of heat modes, priming, filtration, ozone, freeze protection, and clean-up cycles.
Instructions for setting the spa's time-of-day for proper operation and scheduling.
Configuring primary and optional filter cycles, and setting up the light timer.
Steps to lock the spa control panel to prevent unauthorized use or adjustments.
Using Hold Mode for service functions and the optional drain mode feature.
Accessing panel sleep timer, demo mode, fault log, units, and reminder settings.
Configuring cleanup cycles and selecting the display language.
Understanding and resolving messages related to heater operation and flow issues.
Interpreting sensor faults and communication errors for system diagnostics.
Troubleshooting system errors like program memory failure, clock issues, and GFCI test failures.
Introduction to the spaTouch3 control panel, including different display sizes.
Detailed explanation of icons and elements displayed on the spa's main control screen.
How to interpret spa status, temperature display, and message indicators.
Guide to waking the panel, navigating menus, and using common control buttons.
Using the Bluetooth feature and navigating through lists and selections on the control panel.
How to save or cancel settings and interact with different types of message alerts.
Instructions for setting the spa's time-of-day for proper operation and scheduling.
Instructions for adjusting the spa's set temperature using the control panel interface.
Methods to view and change the spa's set temperature and identify heater status.
How to activate and control various spa devices like jets, blower, and lights.
Configuring primary and optional filter cycles for optimal water cleanliness.
Details on circulation pump modes, purge cycles, and operation of auxiliary control panels.
Steps to lock the spa control panel to prevent unauthorized use or adjustments.
Procedures for unlocking the spa panel and settings, and checking lock states.
Understanding how pumps and circulation pumps operate, including non-circulation systems.
Details on circulation pump modes, freeze protection, and optional clean-up cycles.
Navigating the diagnostics screen for system information, panel versions, and heater details.
Instructions for performing manual GFCI tests and understanding test results.
Detailed steps for manual GFCI testing, interpreting results, and using the reset button.
Configuring heat modes (Ready, Rest, Ready-in-Rest) and understanding the heater pump.
Setting high/low temperature ranges and configuring the M8 energy-saving feature.
Overview of the settings screen and its various options like Heat, Filter, Time, Reminders, and Locks.
Details on hold mode, cleanup cycles, unit preferences, language selection, and panel sleep settings.
Steps for filling the spa, opening valves, and preparing for the initial startup sequence.
Understanding and executing the spa pump priming mode to ensure proper operation.
Interpreting general messages like freezing conditions and heater-related errors.
Understanding sensor faults, system errors, and managing reminder messages for maintenance.
Managing reminders, communications errors, test software messages, and message notes.
Optimizing power efficiency, adjusting jets, and operating LED lighting modes.
Operating diverter knobs, air venturis, and optional waterfall features.
Explanation of the Adjustable Therapy System, including pump control, pulse modes, and sensors.
Understanding chemical balance, sanitization, filtration, and regularity for optimal water quality.
Methods for testing and balancing total alkalinity, pH, and calcium hardness in spa water.
Using chlorine or bromine as sanitizers and the process of shocking the water.
Understanding bather load effects and procedures for cleaning spa filters.
How the ozonator works and its role in spa water maintenance.
Recommended schedule for spa maintenance tasks, including water testing and filter cleaning.
Diagnosing and solving common water clarity problems like cloudy water, odor, and algae.
Addressing issues like organic buildup, eye/skin irritation, stains, and scale.
Easy steps for removing and re-installing spa pillows for cleaning and maintenance.
Instructions for safely removing and replacing spa jets for cleaning or repair.
Proper installation of the spa cover and its locking system for safety and security.
Steps for fastening the spa cover using the provided locking hardware and key.
Step-by-step guide for draining the spa for cleaning, maintenance, or winterization.
Procedure for preparing the spa for cold weather to prevent freeze damage.
Information on cleaning and replacing spa filters for optimal performance.
Steps for preparing the spa for short-term absences, including water quality and temperature settings.
Proper cleaning methods for spa covers, pillows, and the spa shell using appropriate products.
Instructions for pairing a Bluetooth device and using the spa's integrated sound system.
Catalog of various snap-in SQR jet inserts with part numbers and dimensions.
Catalog of additional snap-in SQR jet inserts with part numbers and dimensions.
Catalog of jet inserts, diverter valves, and pillows with part numbers.
Catalog of diverter valves, wall fittings, and related components with part numbers.
Catalog of jet inserts, waterfalls, filters, drains, and accessories with part numbers.
Catalog of filters, skimmers, and LED lighting components with part numbers.
Information on cover locks, keys, replacement cabinet panels, and spa cover types.
Solutions for common startup issues like pump not priming or breaker tripping.
Resolving problems with system power, control panel response, and spa not turning off.
Solutions for issues like spa water not getting hot, overheating, and low water pressure.
Diagnosing and resolving pump issues such as constant running, noise, or shutdown.
Addressing pump operation issues and understanding/managing thermal creep in the spa.
Details on the warranty coverage for the spa shell structure and interior finish.
Warranty coverage for equipment, plumbing, and cabinet materials against defects.
Warranty coverage for various spa components, accessories, and the importance of genuine parts.
Understanding warranty limitations, exclusions, disclaimers, and consumer legal rights.
To Next Page
General