70
5. Cleaning and Maintenance5. Cleaning and Maintenance
5.1 Removing and Re-seating the Pillows5.1 Removing and Re-seating the Pillows
You can remove the pillows for cleaning
and maintenance quickly and easily. This
method works for all types of pillows.
Grab the lower edge of the pillow with both
hands firmly and pull up. As you do this, the
pillow inserts will pop out of the holes.
Re-seat the pillows by aligning the pillow
inserts with the holes and striking the pillow
hard enough to insert the pegs back into the
holes.
5.2 Jet Removal and Replacement5.2 Jet Removal and Replacement
Jets can be easily removed for cleaning.
Grasp the outer rim of the jet and turn it
counter-clockwise until it completely stops.
You may feel it slightly loosen pop out a bit
from the fixture. Pull the jet out from the jet
fixture. The jet will be very snug and may
require some force to remove it. DO NOT PRY
OUT JETS.
To replace the jet, place it in the fitting and
turn it clockwise until it snaps in and can be
rotated freely about half a turn.
To Next Page
Loading...
