Need help?Do you have a question about the Cal Test Electronics CT2700 and is the answer not in the manual?
General| Model | CT2700 |
|---|---|
| Manufacturer | Cal Test Electronics |
| Bandwidth | 100 MHz |
| Attenuation Ratio | 10:1 |
| Input Impedance | 10 MΩ |
| Compensation Range | 10 - 35 pF |
| Cable Length | 1.2 m |
| Connector Type | BNC |
Advice against working alone when operating with high voltages.
Instructions to inspect the probe and accessories for damage before each use.
Emphasizes the need for dry hands, shoes, floor, and work bench during measurements.
Warning against removing the probe casing due to risk of electric shock.
Precaution to remove jewelry and avoid touching exposed connections when power is present.
Alerts to potential hazardous voltages in unexpected locations due to fault conditions.
States the probe is not authorized for human body contact or life-support systems.
Prohibits installing substitute parts or performing unauthorized modifications.
Specifies that only trained and experienced personnel should use the probe.
Advises against applying potentials exceeding the probe's maximum voltage rating.
Instructs to operate the probe only from a power source within specified voltage limits.
Details the critical importance of proper grounding procedures before and during use.
Restricts probe usage to Measurement Category I (CAT I) environments.
Reminds users to keep fingers behind the probe's finger guard during use.
Provides instructions for safely connecting and disconnecting the probe from high voltage.
Advises keeping the probe body clean and free of any conductive contamination.
Specifies suitable operating environments and conditions to avoid for the probe.
Warns that measurements may be inaccurate in non-office-type environments.
Information on proper disposal of electronic equipment according to WEEE directive.
General description of the Cal Test CT2700 high voltage divider probe.
Lists the key features and specifications of the CT2700 probe.
Guidance on inspecting the probe and verifying shipment contents upon receipt.
Details the terms and conditions of the one-year limited warranty for the product.
Provides contact information for calibration, repair, and technical support.
To Next Page