CalAmp LMU-3030 User Manual

3.3.1 Three-Axis accelerometer input
the LMU-3030™ supports an internal 3 Axis Precision Accelerometer as one of its discreet inputs. When
the LMU is moved in any direction, the associated input will be in the High state. If the LMU’s
accelerometer does not detect motion, then the input will be in the Low state. No external connections are
required for this functionality to be operational.
3.3.2 Status LEDs
The LMU-3030™ is equipped with three Status LEDs, one for GPS and one for COMM (wireless
network status), and one for VBUS. The LEDs use the following blink patterns to indicate service:
LED #1 (Comm LED - Orange) Definitions
Condition
LED 1
Modem Off
Off
Comm On - Searching
Slow Blinking
Network Available
Fast Blinking
Registered but no Inbound Acknowledgement
Alternates from Solid to Fast Blink every 1s
Registered and Received Inbound Acknowledgement
Solid
LED #2 (GPS LED - Green) Definitions
Condition
LED 2
GPS Off
Off
GPS On
Slow Blinking
GPS Time Sync
Fast Blinking

CalAmp LMU-3030 Specifications

General

Brand	CalAmp
Model	LMU-3030
Category	GPS
Language	English