To Next PageTo Next Page
Need help?Do you have a question about the CalAmp LMU-3030 and is the answer not in the manual?
General| GPS Accuracy | 2.5m CEP |
|---|---|
| Digital Outputs | 2 |
| Antenna | Internal GPS and cellular antennas |
| Wi-Fi | No |
| Bluetooth | No |
| Accelerometer | Yes |
| Operating Temperature | -30°C to +75°C (-22°F to +167°F) |
| Cellular Technology/Cellular Connectivity | GSM/GPRS |
| Internal Battery/Internal Backup Battery | Yes |
| Communication | GSM |
Provides information on basic setup, installation, hardware, and specifications.
Outlines assumptions made about the reader's familiarity with GPS and vehicle installation.
Describes CalAmp as a wireless communications product provider.
Introduces the LMU-3030™ as a mobile tracking device with integrated components.
Explains the purpose of fleet management systems and the LMU-3030's role.
Details the components of a typical fleet management system based on CalAmp devices.
Describes the wireless data network as the bridge between the server and the LMU-3030.
Defines LM Direct™ and backend software roles in data management.
Explains PULS™ maintenance server and LMU Manager configuration tool.
Details crucial precautions for handling the LMU-3030, focusing on ESD.
Warns about EOS damage and instructs on proper battery disposal.
Lists environmental conditions and SAE tests the LMU-3030 is designed to withstand.
Details power consumption, GPS receiver, and modem specifications.
Describes the primary connector, serial adapters, and available I/O ports.
Explains the accelerometer input and the function of status LEDs.
Provides a step-by-step guide for initial configuration and provisioning.
Details AT commands for setting IP addresses, URLs, and verifying settings.
Lists APN, username, and password settings for various network operators.
Guides on checking availability and activating LMUs using AT commands.
Details carrier-specific activation for CDMA devices like Verizon and Sprint.
Guides on the physical installation process of the LMU into a vehicle's OBD2 connector.
Explains the vehicle detection process and ATIV/SMS commands to check status.
Describes methods to verify Comm, GPS, and Inbound functionality post-installation.
Details checking network registration and data session using LEDs or AT commands.
Explains how to verify GPS service using status LEDs or AT commands.
Describes verifying data transmission to the correct server via AT commands.
Details obtaining device status (Comm, GPS, Inbound) via SMS messages.
Explains COM, GPS, and Input/Output status fields from SMS responses.
Outlines terms, definitions, and background for software and documentation use.
Details permitted uses and restrictions for Developer and Use Licenses.
States warranty coverage for physical media and printed materials.
Provides disclaimers of warranties and user acknowledgement of terms.
Specifies governing law and restricted rights for U.S. Government use.
Certifies compliance with FCC RF hazard requirements for PCS equipment.
Outlines FCC/IC compliance statements, warnings, and device notices.
Addresses RF exposure limits for mobile transmitting devices and required separation distances.
