Calculated Industries 4065 - Page 96

88 — C ONSTRUCTION M ASTER
®
P RO / T RIG / D ESKTOP
(Cont’d)
KEYSTROKE DISPLAY
To Set “Meter” Linear Decimal Format:
ß (10th press of ß ) METR 0.000 M
+ (plus sign) METR FLOAt M
+ (repeats options) METR 0.000 M
To Set “Number of Decimal Places for Degree Displays”:
ß (11th press of ß ) DEG 0.00°
+ (plus sign) DEG FLOAt
+ (repeats options) DEG 0.00°
To Set Fractional Mode to “Standard” or “Constant”:
ß (12th press of ß ) Std.
+ (plus sign) COnSt
+ (repeats options) Std.
Note: Press o at any time to exit the Preference Mode.