Calculated Industries Construction Master IV - Page 6

6 — Construction Master IV
Dimension Keys
[Weight] — Weight Key
Enters or converts (a volume value)
to tons, pounds, metric tons or kilo-
grams. Repeated presses will cycle
through these units.
[Conv] [%] — Weight/Volume
Enters or converts the Weight per
Volume setting as Tons/Yard³,
Lbs/Yd³, Lb/Ft³, Metric Ton/m³ or
kg/m³. Repeated presses will cycle
through these settings.
[Cu] — Cubic Key
Defines a volume (
5 [Cu] [Yds]
).
[Sq] — Square Key
Defines an area (
5 [Sq] [Feet]
).
[Yds] — Yards Key
Enters or converts to yards.
[Feet] — Feet Key
Enters or converts to feet as whole
or decimal numbers. Also used with
the
[Inch]
and
[/]
keys for entering
Feet-Inch values (
6 [Feet] 9 [Inch] 1
[/] 2
). Repeated presses toggle be-
tween Feet-Inch and Decimal Feet.