Calculated Industries Material Estimator - Block Size and Area Storage; Gravel Quantity Calculation; Material Cost Calculation

P OCKET R EFERENCE G UIDE — 8
s B Block Size — Stores the
Block Size. Stores linear
entry as Block Length
and area as Block Area.
To recall this setting,
press v B. The default
length is 16 Inches and
the default area is 128
Square Inches (includes
1/2” mortar).
G
Gravel — Calculates tons of
gravel required, based on
an entered volume and a
stored Weight per Volume.
s G Gravel Weight per
Volume — Stores the
number of Tons per Cubic
Yard of gravel. To recall
this setting, press v G.
Default is 1.5 Tons per
Cubic Yard.
C 0 Cost — Calculates total
material cost based on
stored Unit Cost and
entered or solved material
quantity.
s 0
Unit Cost — Stores the
Unit Cost for calculating the
total cost. To recall this set-
ting, press v 0. Default
is 0.00 (no Unit Cost).