Caldera Seychelles - Page 21

Page 18
Operating Instructions
TO CHANGE AUDIO SOURCE
From the SETUP Source menu:
• This Source screen illustrates the
current audio source the spa is
using.
• Press ▲ or ▼ soft buttons to
change the desired source: TV,
AUX or Bluetooth
®
.
To use the Bluetooth screen, your audio Bluetooth device must be paired
with the spa.Audio must be On to use Bluetooth and only one paired
Bluetooth device will work at a time.
TO ADJUST TREBLE
From the SETUP Source menu:
• Press SETUP Source soft button to
advance to the SETUP Tone, Treble
screen.
• Press the soft button next to ▲ or ▼ to
change the Treble between -5 and +5.
TO ADJUST BASS
From the SETUP Source menu:
• Press SETUP Source soft button to advance to the SETUP Tone,
Treble screen.
• Press SETUP Tone,Treble soft
button to advance to the SETUP
Tone, Bass screen.
• Press the soft button next to ▲ or ▼
to change the Bass between -5 and
+5.
TO ADJUST BALANCE
From the SETUP Source menu:
• Press SETUP Source soft button to advance to the SETUP Tone,
Treble screen.
• Press SETUP Tone,Treble soft button
to advance to the SETUP Tone, Bass
screen.
• Press SETUP Tone,Bass soft button
to advance to the SETUP Balance
screen.
• Press the soft button next to ▲ or ▼ to
change the Balance between -5 and +5.
TO ADJUST SUBWOOFER
From the SETUP Source menu:
• Press SETUP Source soft button to
advance to the SETUP Tone, Treble
screen.
• Press SETUP Tone,Treble soft
button to advance to the SETUP
Tone, Bass screen.
• Press SETUP Tone,Bass soft button to advance to the SETUP
Balance screen.
• Press SETUP Balance soft button to advance to the SETUP
Subwoofer screen.
• Press the soft button next to ▲ or ▼ to change the Subwoofer Volume
between 0 and 11.
TO DISCONNECT BLUETOOTH (RESET)
From the SETUP Source menu:
• Press SETUP Source soft button to
advance to the SETUP Tone, Treble
screen.
• Press SETUP Tone,Treble soft button
to advance to the SETUP Tone, Bass
screen.
• Press SETUP Tone,Bass soft button
to advance to the SETUP Balance
screen.
• Press SETUP Balance soft button to advance to the SETUP
Subwoofer screen.
• Press SETUP Subwoofer soft button to advance to the SETUP
Music Status screen.
Press the soft button next to Reset to disconnect any device using the spa
music system so that another paired device may be used. This is also
necessary when trying to pair multiple devices because pairing is NOT
possible when another device is connected to the music system.
• Press SETUP Music Status soft
button to advance to the SETUP
BLUETOOTH screen.
To pair, press PAIR soft button followed
by pressing "connect" next to My Spa
BTXR on your device.
IMPORTANT: Use the BACK hardbutton
to go back to the Function:SET screens if desired.
FRESHWATER SALT SYSTEM
(OPTIONAL)
The following applies to spas that
have a FRESHWATER Salt System
installed
• Press the OPTIONS hard button
on the Control panel.
• Press the soft button next to Salt
System view the Salt Screen.
(see FRESHWATER Salt System
Owner's Manual for more information).