Calea Ambix Activ - Setting Continuous Mode

Ambix Activ Ambulatory Pump and Accessories - User Guide
To set your specific mode - Continuous Mode
This mode is used if you would like your fluids administered continuously.
Switch the pump on
1
Press
until you get to the following symbol
2
Hold
to reset for new infusion.
3
Hold +/ - down at the same time, to set target volume.
4
Set the rate.
5
Press
6
To stop the pump, hold
7
for 3 seconds
9
Freephone 24 hour Advice Line 0 8 0 0 121 830 0