Time Set ( CLK )
The time on the clock will be set to 12:00 as the default. Program the current time by
rotating the volume control clockwise to adjust the minutes and counterclockwise to adjust
the hours.
18) MENU FUNCTION LIST (MENU)
Press DISPLAY/ MENU for more than 3 seconds to access the menu. Will appear
in the display momentarily. Navigate the menu by pressing DISPLAY/ MENU momentarily to
move forward to the next option. The menu can also be navigated by using the Tuning Up
or Tuning Down Button to move to the next or previous option. Once the desired option
appears in the display, adjust that option by rotating the volume control within 5 seconds.
The following options are adjusted through this menu feature.
7.MENU OPERATION
Incoming call ringing volume ( VOL)
The unit can preset the Ringing volume level for any incoming call. The default RINGING
VOLUME LEVEL VALUE is “20”. Rotate the encoder knob to adjust from Min 00 to Max 38.
BT
Pairing ( PAIR HF )
This feature is used to pairing the unit's Blue tooth system to your mobile phone or other
Blue tooth device. Under the MENU “Pairing” mode then press Audio button to start
activating the Pairing.
Pls refer to BLUE TOOTH HAND FREE Operation regarding the details operation of
“PAIRING”.
Tips
E - 9
AREA (TUNER FREQUENCY SPACING)
This option allows the selection of the frequency spacing appropriate for your area. "AREA
EURO" is the default setting. Rotate the volume control to select the U.S.A. Latin America,
Europe or Oirt options.
Re-connection/Dis-connection (RE-CON / DIS-CON )
This feature is allows to Re-connect or Dis-connect to the paired mobile phone or Blue tooth
device by manually. Under the Menu- “RE-CON”mode, Rotate the encoder to navigate thru
“RE-CON” (re-connection) and “DIS-CON”(Dis-connection). After selected the mode for
connection then press Audio button to start activating the connection mode.
Local / Distance Select
This feature is used to designate the strength of the signals at which the radio will stop
during automatic tuning. "Distance" is the default, allowing the radio to stop at a broader
range of signals. To set the unit to select only strong local stations during automatic tuning,
rotate the volume control (Press the volume up/down button)until "Local" appears in the
display.
“PAIR HF” is special use for pairing with mobile phone with Bluetooth function,
if the pairing device is a Bluetooth Audio device, rotate the encoder to “PAIR
AD” then press Audio button to start activating the pairing with audio device.
Regional On/Off ( REG )
REGIONAL “OFF” will be displayed by default. The user now has 5 seconds to adjust by
using volume up/down button from “off” to “On” . If “on” is selected when the AF search or
PI seek, it will implement to station which have all the PI codes which are the same as
current station.. If “off” is selected, when AF search or PI seek the regional code in the
format PI code will be ignored. A regional station is possible to be received.
The Regional function On/Off Setting is valid when the “AF” function is “on”
To Next Page
Loading...
