Caliber MCD 375 - Audio; Menu Operation; Audio Settings; Bluetooth Pairing and Connection

7. AUDIO / MENU OPERATION
Short press “AUDIO button to access the Audio Menu. User can navigate thru the Audio Menu
items by pressing the Tuning Up or Tuning Down Button. Once the desired menu item appears on
the display, adjust that option by using the Volume Up or Down button within 5 seconds. The
following menu items can be adjusted as described above. The unit will automatically exit the
Audio Menu after five seconds of inactivity.
”
Audio Menu
BASS (Bass Level)
User has 5 seconds to use the Volume Up or Down button to adjust the desired Bass level
range from -6 to +6.
TREBLE (Treble Level)
User has 5 seconds to use the Volume Up or Down button to adjust the desired Treble level
range from -6 to +6.
BALANCE
User has 5 seconds to use the Volume Up or Down button to adjust the Balance between
the right and left speakers from R12 (full right) to L12 (full left). “C00” represents an equal
balance between the right and left speakers.
FADER
User has 5 seconds to use Volume Up or Down button to adjust the Fader between the
front and rear speakers from R12 (full rear) to F12 (full front). “C00” represents an equal
balance between the front and rear speakers.
E - 9
This feature is used to pairing the unit's Blue tooth system to your mobile phone or other
Blue tooth device. Under the MENU “Pairing” mode then press Audio button to start
activating the Pairing.
Pls refer to BLUE TOOTH HAND FREE Operation regarding the details operation of
“PAIRING”.
Tips
“PAIR HF” is special use for pairing with mobile phone with Bluetooth function,
if the pairing device is a Bluetooth Audio device, rotate the encoder to “PAIR
AD” then press Audio button to start activating the pairing with audio device.
PAIR HF / AD
This feature is allows to Re-connect or Dis-connect to the paired mobile phone or Blue
tooth device by manually. Under the Menu- “RE-CON”mode, Rotate the encoder to
navigate thru “RE-CON” (re-connection) and “DIS-CON”(Dis-connection). After selected the
mode for connection then press Audio button to start activating the connection mode.
The unit can preset the Ringing volume level for any incoming call. The default RINGING
VOLUME LEVEL VALUE is “25”. Rotate the encoder knob to adjust from Min 00 to Max 42.
The time on the clock will be set to 12:00 as the default. Program the current time by
rotating the volume control clockwise to adjust the minutes and counterclockwise to adjust
the hours.
RE-CONNECTION/DIS-CONNECTION (RE-CON/DIS-CON)
INCOMING CALL RINGING VOLUME(BT VOL)
TIME SET ( CLK)