— 4 —
7762
1 2 3 4
ETHERNET
1 2
PHONE
WAN Interface
(Fiber)
Power Adapter (110/220 VAC)
Ethernet Cable
POWER
RESET
Connecting Outside Services
Subscriber voice, IP video and data services are attached to the rear of the
GigaHub.
1. Locate the telephone, video, and data cables coming from the home.
2. Connect the incoming telephone lines to the RJ-11 connectors on the
GigaHub.
3. Connect CAT5 or better to the LAN Ethernet (RJ-45) ports for direct-at-
tached devices.
4. Secure all subscriber service wiring as appropriate.
To Next Page
Loading...
