— 5 —
Default Device Settings
Inserted inside the shipping carton of each 814G GigaHub, the inventory
label (x2) provides necessary product information. This information may be
attached to a work order or applied to the exterior of the device for future
reference.
• Serial Number of the 814G GigaHub
• ONU MAC address
• Default Wi-Fi security type
• Wi-Fi security key (WPA Key)
• Default IP address of the home gateway router (needed at initial turn-
up)
• Default login credentials (User Name/Password)
Getting Started
To turn up network services on the 814G GigaHub, two options are avail-
able:
1. Connect an active optical fi ber to the 814G GigaHub’s bulkhead fi tting,
power the unit on, and allow the network OLT (for example, a Calix E7)
to discover the device as an unprovisioned ONT. At the OLT, the net-
work administrator will provision the GigaHub and provide operational
parameters remotely.
2. With the fi ber disconnected, access the Smart Activate or Voice Acti-
vate application included with the 814G and then enter the Registration
ID into the application. With the Registration ID having previously been
entered at the OLT, once the fi ber is connected, the GigaHub will come
up as a provisioned ONT based on the pre-provisioning that was com-
pleted for that Registration ID.
To Next Page
Loading...
