— 6 —
Home Gateway Settings
To turn up home gateway services on the GigaHub, complete the following
tasks:
1. Connect your PC to any LAN Ethernet port on the GigaHub using a
standard Ethernet cable.
2. Open a browser and enter the IP address of the GigaHubs Embedded
Web Interface (EWI): http://192.168.1.1.
Status Quick Start Wireless Utilities Advanced
Home Logon AboutHelp
3. Enter the credentials provided on the label shipped inside the GigaHub
box.
4. Navigate to the Quick Start Menu and set-up the following:
a. Choose how to connect to the Internet
b. Confi gure your 2.4 GHz or 5 GHz wireless network
c. Set the local time zone (may be automatically set by network)
For more information about device provisioning from the EWI, refer to the
GigaFamily Service Providers Guide.
To Next Page
Loading...
