Proprietary Information: Not for use or disclosure except by written agreement with Calix.
.
About Wi-Fi Placement
Certain building materials are particularly effective at blocking Wi-Fi signals (see table below)
and should be considered when locating the GigaSpire. Line of sight is not necessary since
MIMO technology takes advantage of reflections in the over-the-air path to carry additional
data. However, Calix recommends that when possible, Calix GigaSpires should be placed in a
centralized location within the home to yield the best possible results for Wi-Fi coverage.
Building Materials and Their Effect on Wi-Fi Signals
Wood, Drywall, Particle Board, Tile
Tinted or Low-E Glass (metalized)
Note: The lower the attenuation, the better the performance.
Installation Variables
Before installing the GigaSpire, consider what additional services may be implemented.
Various access points are available on the back of the unit which may or may not be used.
Prior to determining the unit's final location, you need to account for the following variables:
Optional: Where will the Ethernet cable be routed?
What type of building material is used in this facility? Make sure you have the appropriate
drills, drill bits and fasteners for routing Ethernet or power cables as they pass through
walls and the like.
To Next Page
Loading...
