16
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
.
Introduction
This document describes the installation of the GigaSpire BLAST u6me. The BLAST u6me
is designed to be placed in a horizontal table-top configuration or can be wall mounted using
the mounting holes molded into the back of the unit.
Powering Options
Attach to any 110/220 VAC power outlet using the supplied 12 VDC wall transformer.
Note: For the BLAST u6me, the power cord configuration must be appropriate for use
in the country where the device is being deployed.
Note: Only provided and approved power cords or voltage adapters should be used to
connect to this product(s).
Tabletop or Wall Mount - u6me
Power Supply (2-Pin)
To Next Page
Loading...
