Calix T073G - Page 25

25
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Parameter Description
Parameter Description
Enable Enables wireless network.
Mode Select working mode, including the following modes: Auto
(b/g/n), n, b/g, b and g.
Channel By default, the channel is selected automatically.
Transmitting power Select the transmitting power, including the following modes:
100%, 75%, 50% and 25%
Wi-Fi MAC Filter Enables or Disables Wi-Fi MAC Filtering.
SSID Select Select the SSID to be configured.
SSID Name Configure SSID name.
Enable SSID Enables or Disables this SSID.
SSID Broadcast Enables or Disables Broadcast. Disable SSID broadcast will
cause the terminal can not use passive scan to get the SSID.
SSID Isolate Enables or Disables SSID Isolate. Enable Isolate will cause
the PC connecting to its AP cannot be ping.
Enable WPS Enables wireless protected setup function. Disable this
function will cause PC and AP cannot match codes.
WPS Mode Includes two modes: PBC and PIN. PBC is as known as one
key encryption mode. There is no need to input the PIN
code with PBC mode. In the PIN mode, it is needed to input
the PIN code. The two modes need the support from
wireless applications on user’s wireless adapters.
PIN Code Number When PIN mode is selected as WPS mode, it needs to input
the PIN code generated by user’s wireless card application.
WPS Connect Button Enables WPS interaction. This can also be done by the WPS
button on ONT hardware.