28
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
2. Set the VLAN ID, VLAN PRI, and SSID values.
3. Under the WiFi setup page, finish the configuration of the selected SSID.
For the selected parameters shown below, the following settings are recommended:
Parameter Recommended Value
Mode Auto (b/g/n)
Channel Auto-selected value
WiFi MAC
Filter
Disable
SSID Broadcast Enable
SSID Isolation Enable
WPS
parameters
N/A
Encrypt Mode OPEN
To Next Page
Loading...