Calix T073G - Page 35

35
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Parameter Description
Destination IP Address Input the destination IP address.
Destination Netmask Input the destination Netmask.
Protocol Includes three protocols: TCP, UDP and ICMP. In
the TCP and UDP protocols, it is needed to input
the Destination Start Port and Destination End
Port.
Destination Start Port Input the destination start port number
Destination End Port Input the destination end port number
DSCP Remark New DSCP value.
Add Button Add this entry into the DSCP Remark table.
Delete Button Delete the MAC to IP binding rule in the local
gateway tables.
Save Button Save the configuration.
Refresh Button Clear the configuration without being saved.