43
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Parameters Description
Parameter Description
Enable NAT
Fullcone
Check to enable the NAT Fullcone. Or the symmetric cone
NAT is enabled.
WAN Port Input WAN side port range used by port forwarding
LAN port Input LAN port used by port forwarding
LAN IP address Input LAN side IP address
Protocol Select the protocol for port forwarding
TCP
UDP
All
Enable mapping Enables or disables mapping between WAN port and LAN port
WAN Connection
List
Select which WAN link to use port forwarding setup
Add Button Create a new mapping rule using above port forwarding setup
To Next Page
Loading...