EasyManua.ls Logo

Callaway TRAVERSE - Cart Adjustments and Securing; Securing Golf Bag; Transportation and Maintenance

Callaway TRAVERSE
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
CART HANDLE ADJUSTMENT
To adjust the angle of the cart handle, loosen (rotate counterclockwise) the black knob with the
Callaway Chevron located near the upper bag holder.
Adjust the handle to the desired angle and rotate the knob clockwise to tighten
• Caution: When adjusting the handle, loosen the knob enough so there is a space between the
“teeth” on the cart handle. If the knob is not loosened enough, the “teeth” can wear and cause
adjustment issues.
SECURING BAG TO CART
One end of the straps has a loop and the other end has a plastic ball attached. The loop goes
around the ball to secure your bag using tension.
There is an upper bag strap and a lower bag strap.
The bottom of your golf bag rests on the 2 angled frame pieces which have a plastic ball
attached to the ends.
If you need more tension on the bag straps to hold your bag in place, tie knots in the straps to
increase the amount of tension.
REMOTE MOUNT
On the back of the cart handle, there is a plastic “ring”. If you would like to secure the remote to
the cart, the remote clip can slide into the “ring” for convenient remote placement.
Store remote control in closable compartment when the remote is not in use & during transportation.
TRANSPORTATION
Fold the handle down & tighten the adjustment knob
Securing arm to cart:
With the cart handle folded down, use the lower
bag strap (the end with the ball attached) & loop
around the upper bag holder
Secure bag strap loop to the silver ring mounted
on the cart frame. The silver ring is located in
front of the cart battery.
Removing wheels: removing the wheels and wheelie
bar for transportation is based upon the users’ needs.