CalMag CalSoft Mini - Programming

Programming
1. Key Denition:
Menu key ‘ ’
• Press this key to enter or exit the menu.
• Press and hold this key for 3 seconds to unlock keys locked at standby status.
Set/Regen. key ‘ ’:
• Press this key to select a program or to save the settings.
• Press and hold the key for 3 seconds to initiate a manual regeneration at standby status.
Up and Down key ‘ ’,’ ’:
• Press the key to increase or decrease the value of the settings.
• Press the key to enter the previous or the next menu.
2. Setting Methods:
• Press the key ‘ ’ to enter the menu.
• Press the key ‘ ’ or ‘ ’ to select a parameter.
• Press the key ‘ ’, the parameter starts ashing.
• Press the key ‘ ’ or ‘ ’ to change the value.
• Press the key ‘ ’ to save the setting.
• Press the key ‘ ’ or ‘ ’ to select other parameters.
• Follow the above steps to change other parameters.
• Press the key ‘ ’ to exit settings.
You can only change the ashing parameters.
Program will be back to standby status if any key was not operated within 1 minute.
Without being operated within 3 minutes, the keys will be locked.
- 12 -
CalSoft Mini, Midi & Maxi
6. Programming