The display unit
doesn't turn on
Refer to "Turn Display Unit On and Off" on
page 7
Restart the display unit, and pull out the
antenna.
Test the signal in another location.
Keep it away from other 2.4GHz products,
like WIFI Routers, Microwave ovens and
other baby monitors, which may interfere
with the connection.
Re-pairing, follow the Operations guide to
Delete the camera and add it back on
page 10.
Check the volume settings on the monitor,
making sure it is not on mute.
Image is in black
and white?
Night Vision makes picture appears as black
and white, when the light sensor detects
enough light, it will switch back to full colour.
Can't connect to
the WIFI?
This model doesn't connect to WIFI. The
image only runs on the display unit.
The product
doesn't charge or
takes too long?
Confirm the power point in working order.
Make sure to use the provided charger.
There's no video
on the display
unit?
Confirm the camera has been connected
to power, and the power indicator is on.
Follow the troubleshooting guide to re-
pair the camera with the display unit.
Questions & Answers
12
To Next Page
Loading...