To Next PageTo Next Page
Need help?Do you have a question about the Calpeda NMD Series and is the answer not in the manual?
General| Pump Type | Centrifugal |
|---|---|
| Series | NMD |
| Liquid Temperature Range | -10°C to +90°C |
| Maximum Working Pressure | 10 bar |
| Insulation Class | F |
| Speed | 2900 rpm |
| Housing Material | Cast Iron |
| Seal Type | Mechanical seal |
| Applications | Water supply, irrigation, industrial applications |
| Motor Type | Asynchronous |
| Materials | Cast iron, stainless steel |
| Power | 0.37 kW to 15 kW |
| Frequency | 50Hz |
| Power Range | 0.37 kW to 15 kW |
| Impeller Material | Stainless Steel |
| Shaft Material | Stainless steel |
| Standards | EN 733 |
Defines the specific applications and liquid types for the pumps.
Lists key technical specifications like speed, voltage, and pressure.
General safety advice and precautions before using the product.
Details external safety features that prevent contact with internal parts.
Specifies site requirements, including ventilation and avoiding explosive atmospheres.
Details requirements for safe electrical connection by a qualified electrician.
Step-by-step guide for the initial startup procedure, including priming.
Lists causes and remedies for the motor failing to start.
Diagnoses reasons for the pump running without water flow.
