Calphalon BVCLECMPBM1 - Page 27

Conical Burrs are used to grind coffee beans
to a suitable size for espresso extraction.
Deposits of grinds and oils build up over
time, affecting the taste of the espresso and
operation of the integrated Grinder.
Cleaning Grinding Cradle and Grind Outlet
• Weekly
Remove any coffee grinds from the Grinding
Cradle and Grind Outlet with the Cleaning
Brush and wipe with a damp cloth, then
wipe dry.
Cleaning the Bean Hopper
• 2-3 Months
If the Grinder is used frequently (everyday),
the Bean Hopper needs to be cleaned to
ensure best performance.
• Preparing to Clean Bean Hopper
- Turn off the machine, switch off and
unplug at power outlet.
- Make note of the current Grind Setting
(to use as the starting point after cleaning).
• Remove and Clean Bean Hopper
- Turn Bean Hopper fully counter-
clockwise, to close the Hopper Gates and
unlock the Bean Hopper.
- Remove the Bean Hopper from the
Grinder Collar and store any remaining
beans in an airtight container to preserve
their freshness.
- Wash the Bean Hopper in warm soapy
water, then rinse. Let the Bean Hopper
stand to allow thorough air drying before
replacing.
• Replace Bean Hopper
- Ensure the Grinder Collar is clear of
coffee beans or grinds.
-
Ensure the Hopper Guide is aligned with
the vertical white lines on the Hopper base.
- Align and insert the Bean Hopper into
the Grinder Collar. Firmly push down
and turn clockwise to lock into place and
open the Hopper Guide.
- Reset to the Grind Setting noted prior
to cleaning.
27
Care and Cleaning - Grinder
BARISTA MAX
GRINDER
MANUAL SHOT
CLEAN
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN and INSERT ALIGN HOPPER GUIDE
2.TURN
CLEAR OF
COFFEE BEANS
and GRINDS
S
PUSH DOWN
PUSH DOWN PORTAFILTER
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
CAUTION: Do not immerse the machine
in water.
CAUTION: To prevent damage to the
appliance do not use alkaline cleaning
agents, abrasives or metal scourers.
Note: Coffee grinds caught under the Top
Burr may prevent the Bean Hopper from
seating correctly. If this happens grind off
excess coffee beans, see page 28.
Note: After cleaning, the optimum
Grind Setting may have changed. To
find the optimum Grind Setting use the
information on pages 14-15.
BARISTA MAX
GRINDER
MANUAL SHOT
CLEAN
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN and INSERT ALIGN HOPPER GUIDE
2.TURN
CLEAR OF
COFFEE BEANS
and GRINDS
S
PUSH DOWN
PUSH DOWN PORTAFILTER
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
BARISTA MAX
GRINDER
MANUAL SHOT
CLEAN
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN and INSERT ALIGN HOPPER GUIDE
2.TURN
CLEAR OF
COFFEE BEANS
and GRINDS
S
PUSH DOWN
PUSH DOWN PORTAFILTER
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
BARISTA MAX
GRINDER
MANUAL SHOT
CLEAN
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN and INSERT ALIGN HOPPER GUIDE
2.TURN
CLEAR OF
COFFEE BEANS
and GRINDS
S
PUSH DOWN
PUSH DOWN PORTAFILTER
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE