Calrec Argo S - DSP Packs & Multiple Mixers

40 ImPulse IP Audio Routing & Mixing System Start Up Guide
DSP PACKS & MULTIPLE MIXERS
In addition to the 8 basic single console DSP Pack arrangements which are described in detail on the next 2 pages, the
digital signal processing element of the Impulse core allows a combination of different ‘Console Packs’ across multiple
mixing consoles. Up to 4 DSP mezzanine cards can be fitted to the DSP module which has been designed to be flexible &
provide sufficient processing for up to 4 different consoles connected to an Impulse core arranged to run on the 2 pairs of
Mezzanine modules. The DSP Pairing Options table is shown below.
DSP MIXER PAIRING OPTIONS
DSP Pack
Licence Name
Argo S/Argo Q
Mixer A
Argo S/Argo Q
Mixer B
Argo S/Argo Q
Mixer C
Argo S/Argo Q
Mixer D
Base Pack 1
Pack 1
Pack 1
None
Pack 1
Pack 1
Pack 1
None
Pack 1
Base Pack 2
Pack 2
Pack 2
Pack 2
None
Pack 1
Pack 2
Pack 2
Pack 2
Pack 2
None
Pack 2
Pack 2
Base Pack 3
Pack 3
Pack 3
Pack 3
Pack 3
None
Pack 1
Pack 2
Pack 3
Pack 3
Pack 3
Pack 3
Pack 3
None
Pack 1
Pack 2
Pack 3
Base Pack 4
Pack 4
Pack 4
Pack 4
Pack 4
Pack 4
None
Pack 1
Pack 2
Pack 3
Pack 4
Pack 4
Pack 4
Pack 4
Pack 4
Pack 4
None
Pack 1
Pack 2
Pack 3
Pack 4
Base Pack 5
Pack 5
Pack 5
Pack 5B
Pack 5B
Pack 5B
Pack 5C
None
Pack 1
Pack 2
Pack 3
Pack 4
Pack 5C
Pack 5
Pack 5
Pack 5B
Pack 5B
Pack 5B
Pack 5C
None
Pack 1
Pack 2
Pack 3
Pack 4
Pack 5C
Base Pack 6
Pack 6
Pack 6
Pack 6B
Pack 6B
None
Pack 1
Pack 2
Pack 3
Pack 6
Pack 6
Pack 6B
Pack 6B
None
Pack 1
Pack 2
Pack 3
Base Pack 7
Pack 7
Pack 7B
None
Pack 1
Pack 7
Pack 7B
None
Pack 1
Base Pack 8
Pack 8 None Pack 8 None
Notes: Mixers A & B reside on the first pair of Mezzanine cards slots 0 & 2 and Mixers C & D reside on the second pair of
Mezzanine cards slots 1 & 3 on the DSP carrier module, and the mapping of the Mixer packs to the actual surfaces can be
swapped around as required.