Need help?Do you have a question about the Calrec OMEGA and is the answer not in the manual?
Modifications by unauthorized parties may invalidate features and void liability.
Procedures to protect sensitive parts from static discharge and maintain warranty.
Explanation of warning symbols for dangerous voltages and important instructions.
Guidelines for cleaning equipment panels using anti-static screen cleaner.
Warning against removing power supply blanking plates to prevent electric shock.
How to contact Calrec for technical assistance and product support.
Details on product warranty conditions and the procedure for goods repair.
Information on accessing the manual via CD-ROM or the console's PC.
Information on the use of lead-free solder due to RoHS legislation.
Overview of frame sizes, channel capacity, DSP operation, and hot plugging capabilities.
Specifies temperature, humidity, and altitude limits for operation and non-operation.
Details system earthing requirements and AC mains power connection guidelines.
Guidelines for touch screen security and cleaning TFT displays.
Guidelines for labelling I/O ports, including pair usage and specific exceptions.
How to configure port lists for grouping and selection on the control surface.
Technical specifications for digital and analogue inputs and outputs.
Key performance metrics and synchronization capabilities of the system.
Describes typical layouts for 24, 32, and 48 fader frames.
Provides detailed physical dimensions for console frame sizes and end elevation.
Details rack requirements, unit dimensions, weight, and mounting considerations.
Information on processing rack slots, mounting, and synchronization inputs.
Details the 3U unit for power supplies, fan cooling, and monitoring.
Information on the 1U unit for analogue components and its mounting.
Instructions for PC mounting, remote access, and Hydra network setup.
Details on supplied software, third-party software, and PC user accounts.
Methods for backing up console files using flash cards, LAN, or USB devices.
Details pinouts and circuits for GPIO and Darlington outputs.
Information on the 8 change-over relays on the Bulk Power Supply unit.
Describes signal carriage and formatting for talkback and headphones.
How to connect external equipment and pinout details for connector J26.
Details supported serial interfaces and setup via the Serial Ports screen.
Step-by-step guide to setting up GPI pins for Dolby DP570/DP564.
Details the MADI unit's interfaces, channel modes, and synchronization.
Overview of Hydra Audio Networking, Gigabit Ethernet, and network hardware.
Details on system maintenance, monitoring, and network privacy.
Function of WAB cards and Gigabit Interface Unit for network connection.
Details on recommended Gigabit switches and GBIC connectors.
Explanation of MAC addresses and IP address assignment for network devices.
Description of the Hydra I/O Rack's modular slots and external connections.
Guidelines for rack mounting and fan operation within the Hydra I/O Rack.
How to set up full redundancy for switches, WAB, and Gigabit interfaces.
Explains fault detection mechanisms and automatic signal rerouting.
Details the 2U units, their variants, and power/redundancy features.
Explains the meaning of status LEDs on the front panel.
Information on remote diagnostics, IP address assignment, and unit replacement.
Details AES I/O connections via SCSI connectors and Wide Area Interfaces.
Details analogue I/O connections via SCSI connectors for ADC and DAC cards.
Details XLR input and output panels for digital signals.
Details BNC input and output panels for digital signals.
Explains the 8/12 way EDAC connector panels and their styles.
Details connecting AES inputs using BNC interface panels.
Details connecting AES inputs using XLR interface panels.
Details connecting AES inputs using EDAC interface panels.
Details connecting AES outputs using BNC interface panels.
Details connecting AES outputs using XLR interface panels.
Details connecting AES outputs using EDAC interface panels.
Details connecting analogue mic/line inputs using Style 1 EDAC panels.
Details connecting analogue mic/line inputs using Style 2 EDAC panels.
Details connecting analogue line outputs using Style 1 EDAC panels.
Details connecting analogue line outputs using Style 2 EDAC panels.
Specifies requirements for 36-way SCSI style cabling, including materials.
Installation practices for Category 5e and Category 6 cables.
Forms for labelling AES inputs on cards 1-4.
Forms for labelling AES outputs on cards 1-4.
Forms for labelling Mic/Line inputs on ADC cards 1-3.
Forms for labelling Line outputs on DAC cards 1-3.
General| Brand | Calrec |
|---|---|
| Model | OMEGA |
| Category | Recording Equipment |
| Language | English |
To Next Page
