Calsense ET2000e - Radio Remote (-RRe); Enable Radio Remote

SECTION 8: RADIO REMOTE (-RRe) ®
making
since 1986
w
ater work
SECTION 8: RADIO REMOTE (-RRe)
8A. ENABLE RADIO REMOTE
If the Radio Remote Control option is installed on a
controller (-RRe), the RADIO REMOTE Menu key
will be available at the MAIN MENU screen.
From the MAIN MENU screen:
1.
Press the RADIO REMOTE
Menu key.
The ADD CONTROLLER TO HANDHELD screen
will appear (Figure 8.1).
Add This Controller to the Handheld
The button below and wait
for the response.
ADD CONTROLLER TO HANDHELD
The HandHeld must be on the
ADD CONTROLLER screen. Then push
Figure 8.1
ON THE HANDHELD RADIO REMOTE:
2.
Press the ON/RESUME button.
3. Scroll down to CHANGE LIST (Figure 8.2).
CHANGE LIST
Add via Controller
Add via PC
Delete Controllers !
Figure 8.2
4.
Press the SELECT button.
5. Move the cursor to ADD VIA
CONTROLLER (Figure 8.3).
Add via PC
Delete Controllers !
CHANGE LIST
Add via Controller
Figure 8.3
6.
Press the SELECT button.
AT THE CONTROLLER:
The ADD THIS CONTROLLER TO THE
HANDHELD screen will change to display “OK
Controller has been added” (Figure 8.2).
7.
Press the ADD THIS
CONTROLLER TO THE
HANDHELD Menu key to
activate the controller Radio
Remote.
A
DD CONTROLLER TO HANDHELD
The HandHeld must be on the
A
DD CONTROLLER screen. Then push
The button below and wait
for the response.
Cancel
Please wait . . . \
Figure 8.2
8.
Press the CANCEL Menu key to
end this application.
THIS CONCLUDES THE RADIO REMOTE
SECTION