CAMAG TLC - Unpacking and Installation; Installation of pump unit

TLC Sprayer
Instruction manual, May-18 5
The following consumable parts are available for the CAMAG TLC Sprayer:
Cat. No. Quantity Description
022.6535 Package of 6 5 spray head type A, 1 spray head type B
022.6538 Package of 6 Spray head type B
022.6534 1 Compressed air connector
022.6536 Package of 6 Reagent bottle 100ml with cap
022.6537 Package of 6 Reagent bottle 50ml with cap
022.6540 1 Bottle holder
022.6539 1
Service-Kit comprising: 1 compressed air
connector, 2 gaskets, 2 filters, bottle
holders
2 Unpacking/Installation
Check with reference to the parts supplied section whether any parts are missing.
2.1 Installation of pump unit
Connect the charger unit (1) to a main power outlet and place the pump unit (2) into the
circular cavity of the charger. The pilot lamp (3) lights up.
Prior to first use charge the unit for a minimum of 16 hours.
There is no danger of overcharging. The battery should not be completely discharged –
therefore charge the battery regularly even if the instrument is not used.