Need help?Do you have a question about the Cambium Networks Force 300 CSM and is the answer not in the manual?
Details the ePMP 3000, a high-capacity outdoor point-to-multipoint/point-to-point wireless device.
Explains the ePMP 3000L, a third-gen AP emphasizing high performance in low-density sectors.
Details the ePMP 4500C, a third-gen AP with 8x8 MU-MIMO for high-performance point-to-multipoint.
Describes the ePMP 4500, a third-gen AP with 2x2 MIMO for high-performance point-to-multipoint.
Details the ePMP 4600, a third-gen AP with 4x4 MIMO for high-performance point-to-multipoint.
Explains the ePMP 4500L, a third-gen AP with 2x2 MIMO for high-performance point-to-multipoint.
Details the Force 300-19, an outdoor wireless device for PMP/PTP links, IP55 rated.
Explains the Force 300-19R, an IP67 rated outdoor wireless device with a dual-polarized antenna.
Details the Force 300-16, an outdoor wireless device for PMP/PTP links with a dual-polarized antenna.
Describes the Force 300-13, an outdoor wireless device for PMP/PTP links with a flat-panel antenna.
Covers considerations for planning ePMP link sites, including surveys and requirements.
Details protection measures against power surges and lightning for ePMP installations.
Provides overview of ePMP 3000 AP hardware, including description and part numbers.
Details ePMP 3000L AP hardware, including description, part numbers, and mounting.
Describes ePMP 4500C AP hardware, including part numbers, interfaces, and specifications.
Details ePMP 4500 AP hardware, including part numbers, interfaces, and specifications.
Explains ePMP 4600 AP hardware, including part numbers, interfaces, and specifications.
Details ePMP 4500L AP hardware, including part numbers, interfaces, and specifications.
Details Force 300-25 hardware, including integrated description and part numbers.
Details Force 300 CSM hardware, including description and part numbers.
Covers ePMP power supply units, including description, part numbers, and interfaces.
Covers factors for planning ePMP links, including range, obstacles, path loss, and throughput.
Guides users on accessing and using the ePMP web interface for management.
Provides steps to log into the ePMP web interface as a system administrator.
Explains the guided configuration for ePMP Access Points using the installation wizard.
Guides on configuring ePMP Subscriber Modules via the installation wizard.
Details the ePMP 3000, a high-capacity outdoor point-to-multipoint/point-to-point wireless device.
Explains the ePMP 3000L, a third-gen AP emphasizing high performance in low-density sectors.
Details the ePMP 4500C, a third-gen AP with 8x8 MU-MIMO for high-performance point-to-multipoint.
Describes the ePMP 4500, a third-gen AP with 2x2 MIMO for high-performance point-to-multipoint.
Details the ePMP 4600, a third-gen AP with 4x4 MIMO for high-performance point-to-multipoint.
Explains the ePMP 4500L, a third-gen AP with 2x2 MIMO for high-performance point-to-multipoint.
Details the Force 300-19, an outdoor wireless device for PMP/PTP links, IP55 rated.
Explains the Force 300-19R, an IP67 rated outdoor wireless device with a dual-polarized antenna.
Details the Force 300-16, an outdoor wireless device for PMP/PTP links with a dual-polarized antenna.
Describes the Force 300-13, an outdoor wireless device for PMP/PTP links with a flat-panel antenna.
Covers considerations for planning ePMP link sites, including surveys and requirements.
Details protection measures against power surges and lightning for ePMP installations.
Provides overview of ePMP 3000 AP hardware, including description and part numbers.
Details ePMP 3000L AP hardware, including description, part numbers, and mounting.
Describes ePMP 4500C AP hardware, including part numbers, interfaces, and specifications.
Details ePMP 4500 AP hardware, including part numbers, interfaces, and specifications.
Explains ePMP 4600 AP hardware, including part numbers, interfaces, and specifications.
Details ePMP 4500L AP hardware, including part numbers, interfaces, and specifications.
Details Force 300-25 hardware, including integrated description and part numbers.
Details Force 300 CSM hardware, including description and part numbers.
Covers ePMP power supply units, including description, part numbers, and interfaces.
Covers factors for planning ePMP links, including range, obstacles, path loss, and throughput.
Guides users on accessing and using the ePMP web interface for management.
Provides steps to log into the ePMP web interface as a system administrator.
Explains the guided configuration for ePMP Access Points using the installation wizard.
Guides on configuring ePMP Subscriber Modules via the installation wizard.
General| Frequency Band | 5 GHz |
|---|---|
| Interface | Gigabit Ethernet |
| Ethernet Port | 1 x 10/100/1000 Mbps |
| Power Supply | 12V DC |
| Category | Network Hardware |
| Channel Width | 20 MHz, 40 MHz |
| Channel Bandwidth | 20 MHz, 40 MHz |
| Modulation | 256 QAM |
| Security | WPA2 |
| Operating Temperature | -30°C to +60°C |
| Dimensions | 6.7 x 6.7 x 1.6 in |
| Wireless Standard | 802.11ac |
To Next Page