Need help?Do you have a question about the Cambium Networks cnWave 5G Fixed and is the answer not in the manual?
Explains the intended audience and scope of the guide.
Explains how to interpret references to external and internal document sections.
How users can provide feedback on the document.
Explains the use of warning, caution, and note indicators in the document.
Explains cautions used for system damage warnings.
Explains notes used for additional information or undesirable situations.
Information about product certification and compliance with regulations.
Regulatory compliance information specific to Canada.
Regulatory compliance information specific to European directives.
Declares compliance with EU directives for CE marking.
How to download and install the latest software for BTS and CPE.
Required skills for installers regarding IP addressing and web interfaces.
Guidance on protecting installations from lightning strikes.
Outlines radio engineering skills and training for installers.
References to license agreements and open-source notices.
Information on reporting problems and understanding warranty terms.
Procedure for obtaining repair or service for the equipment.
Details of the standard one-year hardware warranty and registration.
Recommendations for configuring security parameters and best practices.
Information on proper disposal of equipment and packaging.
Regulatory information for equipment disposal in EU countries.
Disposal guidelines for equipment in non-EU countries.
Provides basic information about BTS and CPE, and required configurations.
Describes key steps for troubleshooting BTS, CPE, and links in a lab.
Steps to configure a PC for IP addressing to communicate with BTS/CPE.
Steps to connect the BTS to power and verify connectivity.
Steps to access the Base Transceiver Station (BTS) web user interface.
Steps to connect the Customer Premise Equipment (CPE) to power using PoE.
Steps to access the Customer Premise Equipment (CPE) web user interface.
Steps to establish a radio link between a BTS and a CPE.
Lists essential parameters for setting up a BTS-CPE link.
Lists parameters for monitoring link status and troubleshooting.
How to change system parameters on the BTS without rebooting.
How to change network parameters on the BTS without rebooting.
How to manage user accounts on the BTS without rebooting.
How to change the operating frequency of the BTS without rebooting.
How to change the antenna polarization setting of the BTS.
How to enable or disable the RADIUS server for CPE authentication.
How to test MU MIMO performance using the BTS web UI.
Alternative method for testing MU MIMO using an iPerf server on Linux.
Steps to update the BTS firmware, requiring a reboot.
How to change the radio channel bandwidth, requiring a reboot.
How to adjust uplink transmit power control, requiring a reboot.
How to reset the BTS to factory defaults, requiring a reboot.
How to reset the CPE to factory defaults, requiring a reboot.
How to import/export BTS configuration for backup or restore.
How to test Maximum Information Rate (MIR) functionality.
Steps to modify MIR parameters in the Radius Server authorize file.
Steps to run the MIR test after parameter modification.
How to test Committed Information Rate (CIR) functionality.
Steps to modify CIR parameters in the Radius Server authorize file.
Steps to run the CIR test after parameter modification.
Explains the methodology for isolating system or link problems.
Primary steps and FAQs for isolating a problem.
Secondary steps to isolate problems after initial fault isolation.
Steps to troubleshoot issues when CPE does not establish Ethernet connectivity.
Steps to troubleshoot why a CPE fails to register with a BTS.
General guidance for diagnosing and troubleshooting BTS issues, including cabling.
Steps to verify correct power up and troubleshoot power cable issues.
Steps to diagnose and troubleshoot issues with the BTS data cable.
Using resistance values to check cable wiring for BTS.
Steps to perform a hardware reset of the BTS to factory defaults.
Steps to perform a hardware reset of the CPE to factory defaults.
Explains the intended audience and scope of the guide.
Explains how to interpret references to external and internal document sections.
How users can provide feedback on the document.
Explains the use of warning, caution, and note indicators in the document.
Explains cautions used for system damage warnings.
Explains notes used for additional information or undesirable situations.
Information about product certification and compliance with regulations.
Regulatory compliance information specific to Canada.
Regulatory compliance information specific to European directives.
Declares compliance with EU directives for CE marking.
How to download and install the latest software for BTS and CPE.
Required skills for installers regarding IP addressing and web interfaces.
Guidance on protecting installations from lightning strikes.
Outlines radio engineering skills and training for installers.
References to license agreements and open-source notices.
Information on reporting problems and understanding warranty terms.
Procedure for obtaining repair or service for the equipment.
Details of the standard one-year hardware warranty and registration.
Recommendations for configuring security parameters and best practices.
Information on proper disposal of equipment and packaging.
Regulatory information for equipment disposal in EU countries.
Disposal guidelines for equipment in non-EU countries.
Provides basic information about BTS and CPE, and required configurations.
Describes key steps for troubleshooting BTS, CPE, and links in a lab.
Steps to configure a PC for IP addressing to communicate with BTS/CPE.
Steps to connect the BTS to power and verify connectivity.
Steps to access the Base Transceiver Station (BTS) web user interface.
Steps to connect the Customer Premise Equipment (CPE) to power using PoE.
Steps to access the Customer Premise Equipment (CPE) web user interface.
Steps to establish a radio link between a BTS and a CPE.
Lists essential parameters for setting up a BTS-CPE link.
Lists parameters for monitoring link status and troubleshooting.
How to change system parameters on the BTS without rebooting.
How to change network parameters on the BTS without rebooting.
How to manage user accounts on the BTS without rebooting.
How to change the operating frequency of the BTS without rebooting.
How to change the antenna polarization setting of the BTS.
How to enable or disable the RADIUS server for CPE authentication.
How to test MU MIMO performance using the BTS web UI.
Alternative method for testing MU MIMO using an iPerf server on Linux.
Steps to update the BTS firmware, requiring a reboot.
How to change the radio channel bandwidth, requiring a reboot.
How to adjust uplink transmit power control, requiring a reboot.
How to reset the BTS to factory defaults, requiring a reboot.
How to reset the CPE to factory defaults, requiring a reboot.
How to import/export BTS configuration for backup or restore.
How to test Maximum Information Rate (MIR) functionality.
Steps to modify MIR parameters in the Radius Server authorize file.
Steps to run the MIR test after parameter modification.
How to test Committed Information Rate (CIR) functionality.
Steps to modify CIR parameters in the Radius Server authorize file.
Steps to run the CIR test after parameter modification.
Explains the methodology for isolating system or link problems.
Primary steps and FAQs for isolating a problem.
Secondary steps to isolate problems after initial fault isolation.
Steps to troubleshoot issues when CPE does not establish Ethernet connectivity.
Steps to troubleshoot why a CPE fails to register with a BTS.
General guidance for diagnosing and troubleshooting BTS issues, including cabling.
Steps to verify correct power up and troubleshoot power cable issues.
Steps to diagnose and troubleshoot issues with the BTS data cable.
Using resistance values to check cable wiring for BTS.
Steps to perform a hardware reset of the BTS to factory defaults.
Steps to perform a hardware reset of the CPE to factory defaults.
General| Brand | Cambium Networks |
|---|---|
| Model | cnWave 5G Fixed |
| Category | Network Hardware |
| Language | English |
To Next Page