Need help?Do you have a question about the Cambium Networks Force 4625 and is the answer not in the manual?
Covers reporting issues, repair services, and warranty terms for ePMP products.
Provides recommendations for system security and explains precautionary statements used in the document.
Includes FCC and IC interference statements and relevant compliance information.
Outlines requirements for disposal of equipment and packaging in EU and non-EU countries.
Introduces key features, uses, variants, and components of the ePMP portfolio.
Details link operation, modulation modes, power control, and security aspects.
Covers web interface, installation, alerts, upgrades, configuration, and software.
Covers site survey, location requirements, and typical installation structure.
Explains protection against power surges, ground bonding, and surge suppression.
Details ePMP power supply units, part numbers, interfaces, and considerations.
Discusses Ethernet standards, cable lengths, and industrial Cat5e cable specifications.
Guides planning links to conform to country-specific regulatory restrictions.
Covers range, obstacles, path loss, and throughput considerations for link planning.
Addresses Ethernet interfaces, management VLANs, and QoS for bridged traffic.
Outlines checks, safety precautions, and regulatory compliance before unit configuration.
Details connecting a management PC, configuring it, and powering up the ePMP device.
Explains logging into the web interface using admin credentials and a web browser.
Guides configuration of key link parameters for the AP using a wizard.
Covers reporting issues, repair services, and warranty terms for ePMP products.
Provides recommendations for system security and explains precautionary statements used in the document.
Includes FCC and IC interference statements and relevant compliance information.
Outlines requirements for disposal of equipment and packaging in EU and non-EU countries.
Introduces key features, uses, variants, and components of the ePMP portfolio.
Details link operation, modulation modes, power control, and security aspects.
Covers web interface, installation, alerts, upgrades, configuration, and software.
Covers site survey, location requirements, and typical installation structure.
Explains protection against power surges, ground bonding, and surge suppression.
Details ePMP power supply units, part numbers, interfaces, and considerations.
Discusses Ethernet standards, cable lengths, and industrial Cat5e cable specifications.
Guides planning links to conform to country-specific regulatory restrictions.
Covers range, obstacles, path loss, and throughput considerations for link planning.
Addresses Ethernet interfaces, management VLANs, and QoS for bridged traffic.
Outlines checks, safety precautions, and regulatory compliance before unit configuration.
Details connecting a management PC, configuring it, and powering up the ePMP device.
Explains logging into the web interface using admin credentials and a web browser.
Guides configuration of key link parameters for the AP using a wizard.
General| Model Number | Force 4625 |
|---|---|
| Category | Network Hardware |
| Frequency Band | 5 GHz |
| Channel Bandwidth | Up to 80 MHz |
| Antenna Gain | 25 dBi |
| Antenna Type | Integrated Dish |
| Output Power | Up to 30 dBm |
| Interface | Ethernet |
| Operating Temperature | -40°C to +60°C |
| Ingress Protection | IP67 |
| Product Type | Wireless Bridge |
| Wireless Standard | 802.11ac |
| Channel Size | 20 | 40 | 80 MHz |
| Range | Up to 200 km |
| Modulation | 256-QAM |
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| Power Supply | PoE |
| Weight | 2.5 kg |
| Dimensions | 30 cm (11.8 in) |
To Next Page