Cambium Networks PMP/PTP 450i Series Release Notes

Release Notes
System Release 13.4
pmp-0979 - July 2015 Page 2 of 50
1 INTRODUCTION
This document provides information for the Cambium Networks PMP/PTP 450, PMP 430,
PTP 230 and PMP/PTP 100 Series System Release 13.4.
Software updates for PMP products are available from:
https://support.cambiumnetworks.com/files
The information in this document is subject to change without notice. The
recommendations, technical data, configurations and statements in this document are
believed to be reliable and accurate, but are presented without implied or express
warranty. Users must take full responsibility for their applications of any product specified
in this document. The information in this document is proprietary to Cambium Networks
Ltd.
2 PMP VARIANTS
System Release 13.4 is compatible with PMP/PTP 450, PMP 430, PTP 230 and PMP/PTP 100
Series modules. This document covers Release Notes for all equipment. For more
information on System Release 13.4, see:
https://support.cambiumnetworks.com/files
2.1 Embedded software
PMP / PTP 450
 CANOPY134BUILDOFFICIAL_MIMO_DESAES_S.pkg3
PMP 430
 DES Encryption: CANOPY134BUILDOFFICIAL_OFDM_DES.pkg3
 AES Encryption: CANOPY134BUILDOFFICIAL_OFDM_AES.pkg3
PTP 230
 DES Encryption: CANOPY134BUILDOFFICIAL_OFDM_DES.pkg3
 AES Encryption: CANOPY134BUILDOFFICIAL_OFDM_AES.pkg3
PMP / PTP 100
 DES Encryption: CANOPY134BUILDOFFICIAL_DES.pkg3
 AES Encryption: CANOPY134BUILDOFFICIAL_AES.pkg3

Cambium Networks PMP/PTP 450i Series Specifications

General

Brand	Cambium Networks
Model	PMP/PTP 450i Series
Category	Wireless Access Point
Language	English