Release Notes
System Release 13.4
pmp-0979 - July 2015 Page 4 of 50
3 NEW FEATURES
The System Release 13.4 introduces the following new features:
Table 1 System Release 13.4 new features
Listen-Before-Talk
(LBT) 5.4 GHz for
PTP 450
Allows configuration of Listen-Before-
Talk(LBT) ETSI for 5.4 GHz.
Enables the display of a security banner
and prompts user to accept security
requirements.
RADIUS Change of
Authorization
Allows the user to change configuration
of SM via RADIUS while SM is in session.
RADIUS VSA for
Zero Touch
Adds support for using RADIUS VSA for
Zero Touch configuration.
PEAP is now supported as outer
authentication so that PEAP-MSCHAPv2
can be used to authenticate SM with
Microsoft RADIUS server.
Custom frequency
configuration at 1
KHz raster
Allows the users to configure custom
frequency at 1 KHz raster for 3.5 and
3.65 GHz.
PMP/PTP
450, PMP
430, PTP
230
Estimate link throughput capacity
without service interruption by sending
few packets, and extrapolating results.
Frame Utilization
Statistics
Provides statistics of RF channel
utilization.
Last run time for
Link Capacity Test
This is an enhancement which displays
time stamp of last performed Link
Capacity Test.
Disable SM
authentication
Ability to disable SM authentication for a
SM connected via ICC (Installer Color
Code) to aid in Zero Touch Config.
To Next Page
Loading...
Need help?
General
