Release Notes
System Release 13.4
pmp-0979 - July 2015 Page 5 of 50
Allows the user to control whether PMP
430 SMs are allowed to register to PMP
450 AP’s.
Update the
SNMPv2c
community string
without reboot
Allows user to modify SNMP community
string without requiring reboot.
Event log for user
initiated reboot
Adds an event log entry for "user
initiated reboot" to the system log.
SNMP support to
do an AP Evaluation
from a SM
Provides an SNMP OID to force a SM to
rescan and do an AP Evaluation. This
performs the same functionality as the
clicking the "Rescan APs" button on the
SM's GUI.
Country code for
Malaysia
Allows operation within regulatory
allowances for Malaysia.
SNMPv3 Auth and
Privacy Password
length check
Requires that Auth and Privacy password
in SNMP setting is not less than 8 digits.
The user login name is case sensitive. It means that the login name can be
created as “ADMIN” and “admin” on the same radio.
The maximum uplink throughput for one VC is limited to 51 Mbps, when the
link is running with 5 ms frame period.
Note:
The User Authentication Method with RADIUS server will not work if AP is
running with 13.3 and SM is running with 13.4.
Please note that if AP and SM on same release i.e. 13.3 or 13.4, there will be
no issue with User Authentication Method.
PMP 400 radios are no longer supported and images are no longer included
in the OFDM CNUT package.
To Next Page
Loading...
Need help?
General
