Cambium Networks PTP 450 User Manual

PMP Synchronization Solutions User Guide EtherWAN Switch Information
PMP-0297 007v001 (January, 2017)
3-24
EtherWAN Switch Information
This section includes key information on the EtherWAN switch. For full details and configuration
information, EtherWAN switch manuals are downloadable from
http://www.etherwan.com/support-mo.php. Consult Table 10
to obtain the appropriate model
number for your EtherWAN switch to use to download the correct manual.
EtherWAN switch management may be accessed in one of three ways:
• Standard web-based browser interface
• External SNMP-based network management using SNMP commands or an Element
Management System such as Prizm or One Point Wireless Manager
• Administration console via the switch’s RS-232 serial port using Windows Hyperterminal or
equivalent
The EtherWAN switch as provided has the IP address, login ID, and password as shown in Table
10.
Table 10 EtherWAN switch details
CMM4
Extended
Model
No.
EtherWAN Switch
Default IP
address
Login ID
Default
password
Total
Ports
10/100
Base-
TX
Ports
10/100/1000
Base-TX
Ports
EtherWAN
Model No.
1090CKHH 14 12 2 EX72129A 169.254.1.1
root
(not
changeable
by user)
No
password
1090CKAA
(earlier
versions)
9 8 1 EX96000 192.168.1.10
admin
(not
changeable
by user)
No
password
The 14-port EtherWAN switch may be reset (rebooted) either remotely or after gaining physical
access to the CMM4:
• remotely: access the CMM4 controller board web page, navigate to Configuration > CMM
and click the
Reset OEM Switch button to power cycle the switch.
• after gaining physical access to the inside of the CMM4 enclosure: press the inset Reset button
on the EtherWAN switch’s faceplate using a nail or similar tool.
Either process reboots the switch but
does not reset it to factory defaults.

Cambium Networks PTP 450 Specifications

General

Brand	Cambium Networks
Model	PTP 450
Category	Wireless Access Point
Language	English