Cambium Networks PTP 700 User Manual

PMP Synchronization Solutions User Guide UGPS Product Description and Overview
PMP-0297 007v001 (January, 2017)
4-2
UGPS Product Description and Overview
The Cambium Networks Universal Global Positioning System (UGPS) is a stand-alone GPS
antenna and receiver with the capability to provide a 1PPS GPS synchronization signal to
Cambium Networks access points (APs), backhaul masters (BHMs), or cluster management
modules (CMMs).
The UPGS features two timing ports for sending GPS timing sync. One or two access
points/backhaul masters/cluster management modules may be synchronized directly by the two
timing ports.
The UGPS may be used with the following Cambium Networks equipment:
• PMP 100 FSK AP
• PTP 100 FSK BH
• PMP 430 OFDM AP
• PMP 400 OFDM AP
• PTP 200 OFDM BH
• PTP 230 OFDM BH (capable of sourcing power to the UGPS via PTP 230 timing port)
• PMP 320 WiMAX AP (AP Software version e2.2 and later)
• PMP 450 OFDM AP (capable of sourcing power to the UGPS via PMP 450 timing port)
• PTP 450 OFDM BH
• CMM3 (CMM3 in Slave mode, CMM3 will receive GPS synchronization pulse, but no GPS
location data)
• CMM4 (CMM4 in Slave mode, CMM4 will receive GPS synchronization pulse, but no GPS
location data)
• ePMP Series
• PMP 450i OFDM AP
• PTP 450i OFDM BH

Cambium Networks PTP 700 Specifications

General

Brand	Cambium Networks
Model	PTP 700
Category	Wireless Access Point
Language	English